KraftMaid Construction Service Nationwide

Why Paradise Homeowners Choose KraftMaid Construction

If you own KraftMaid in Paradise and the doors are peeling, the drawers drag, or a sink leak swelled the boxes, we’re the crew to call. Ellsworth Contractors provides independent KraftMaid construction service and repair across Paradise, Nevada, from cabinet refacing and hardware replacement to full kitchen remodels built around the KraftMaid boxes you already have. We’re not authorized by KraftMaid and we don’t pretend to be. What we are is the local team that’s installed and serviced KraftMaid’s Vantage, Momentum, and Signature lines for years, so we know exactly how those cabinets hold up in 110-degree desert heat and low humidity. Call (888) 445-6077 and we’ll tell you what’s salvageable and what isn’t.

Call (888) 445-6077

Reed Calloway founded Ellsworth Contractors on a simple idea he picked up working job sites across Southern Nevada: build it right the first time or you’ll be back explaining why you didn’t. That’s the standard we bring to every KraftMaid project in Paradise, whether we’re matching four peeling thermofoil door fronts or rebuilding a kitchen from the slab up, and the same KraftMaid service in Winchester.

Why Trust Ellsworth Contractors for Your KraftMaid Construction?

KraftMaid cabinets are everywhere in Paradise. They went into thousands of 1990s and 2000s tract homes, and the brand’s semi-custom Vantage line still shows up in remodels across the valley. These aren’t mystery products to us. Our crew knows the difference between a Vantage particleboard box and the premium all-plywood lines, between thermofoil and painted door construction, and between factory friction hinges that fail in five years and the soft-close hardware that actually survives a house with kids. That knowledge matters when a homeowner needs an honest answer about whether to repair or replace.

Reed grew up in the Whitney neighborhood of Paradise and spent thirty years watching this area turn from scrubland into one of the busiest construction corridors in Nevada, later expanding our Spring Valley KraftMaid service as the community grew. He learned the trade at the College of Southern Nevada’s construction technology program, then spent years framing, finishing, and solving problems under experienced crews before starting Ellsworth. His crew applies that same directness to every KraftMaid job. We source genuine OEM doors and drawer fronts when a factory match is the right call, and we use quality aftermarket soft-close hinges and slides when OEM parts are discontinued or a better value. We’ll also tell you plainly when a cabinet box is too far gone. No upselling. No salvaging garbage. Just cabinets that work.

Common KraftMaid Construction Problems We Fix in Paradise

• Peeling thermofoil on Vantage doors and drawer fronts. Thermofoil is a heat-bonded vinyl layer, and the Southern Nevada sun is brutal on adhesives. In Paradise, we regularly see Vantage thermofoil doors on south-facing runs start lifting and curling at the bottom edges within five to seven years. The low humidity pulls moisture out of the bond line until the foil lets go. We replace the affected fronts with factory-matched OEM doors so the run stays consistent.
• Checking and cracking painted finishes. KraftMaid’s painted and glazed maple doors look sharp on day one, but door panels that face direct window sun in Paradise heat can check, crack, or flake. The finish expands and contracts at a different rate than the wood underneath, and the desert’s 30-degree day-to-night swings speed that up. We refinish when the substrate is sound, reface when it isn’t.
• Swollen particleboard boxes from slow leaks. A dishwasher drip or sink trap leak that runs for months will wick into the particleboard sides and kick plates of Vantage and Momentum boxes. By the time a Paradise homeowner notices, the boards have swelled and crumbled. We assess whether the box is dry and square after the leak is fixed. If it is, we repair. If not, we quote replacement instead of patching a cabinet that will fail again.
• Sagging factory hinges and self-closing slides. KraftMaid’s stock friction hinges and basic self-closing slides wear out. Doors start dragging on the face frame. Drawers don’t seat flush. In a busy Paradise kitchen, this is a daily annoyance. We swap the failing hardware for soft-close slides and hinges, often without touching the doors or boxes.
• Loose countertop seams from sagging drawers. This is a quiet failure most people miss. When a drawer run sags, the shifting weight can pull a countertop seam loose over time. We’ve seen it happen in Paradise kitchens where the original install was never re-checked after the cabinets settled. We re-set the seam, re-level the cabinet run, and replace the worn slides so it doesn’t happen again.

KraftMaid Parts & Our Repair-vs-Replace Approach

We keep a simple rule on KraftMaid work: keep what’s square and dry, replace what’s swelled and failed. If the particleboard box is structurally sound, refacing or re-hinging is almost always cheaper and faster than tearing everything out. We source genuine KraftMaid OEM doors, drawer fronts, hinges, and touch-up finish for factory matches. When OEM parts are discontinued, which happens on older Vantage runs, we use quality aftermarket soft-close hinges and slides that outperform the originals for less money. The honest answer is what you get. If your KraftMaid box swelled from a leak, we say so and quote a replacement, because a patched particleboard cabinet is a cabinet you’ll be calling about again in two years. Call (888) 445-6077 and we’ll give you the repair-or-replace picture on the spot.

Our KraftMaid Service Process – Step by Step

1. 1
   Diagnosis. We inspect the full cabinet run: door alignment, hinge wear, drawer slide action, box squareness, finish condition, and any sign of water intrusion. On KraftMaid Vantage, we check the thermofoil edges specifically, because that’s where heat failure shows first in Paradise’s dry climate.
2. 2
   Repair or install. We replace or reface doors and drawer fronts, swap hinges and slides, re-level cabinets, re-set countertop seams, or install new KraftMaid cabinetry. For full remodels, we spec the cabinet layout to the room’s actual dimensions, not a catalog guess. Countertops come from Cambria, Silestone, or Caesarstone depending on the budget and performance need.
3. 3
   Test. Every door and drawer gets cycled open and shut. Seams get checked for movement. Hardware gets adjusted so doors close soft and drawers seat flush. We look for the little things, like a drawer front that’s slightly wider than the box or a hinge screw that’s half stripped.
4. 4
   Warranty. We stand behind our installation work on every KraftMaid project in Paradise, and we walk you through what the manufacturer covers versus what our workmanship warranty covers before you pay a dime.

KraftMaid Products We Service & Install in Paradise

We service and install across the KraftMaid lineup: the Vantage series with its thermofoil, laminate, and painted or stained door options; the Momentum full-overlay spec-home line; Signature and Passport painted and glazed maple door styles; and the premium all-plywood cabinet lines with soft-close drawer and door hardware. We stock common replacement hardware locally for fast turnaround and order OEM door and drawer fronts direct when a factory match is required. Full kitchen remodels often pair KraftMaid cabinetry with countertops from Cambria, Silestone, or Caesarstone, and we handle that integration in-house. One contractor, every system, from roofline to paver.

We Also Service These Brands

KraftMaid isn’t the only brand in our portfolio. We work with Cambria, Silestone, and Caesarstone for engineered stone countertops, and Kohler and Toto for plumbing fixtures. If your Paradise kitchen or bath remodel pulls in multiple manufacturer lines, we coordinate the whole scope without handing you off to a patchwork of subcontractors.

FAQs – KraftMaid Construction Service in Paradise

Book Your KraftMaid Service in Paradise, NV

If your KraftMaid cabinets are peeling, sagging, or swelled, don’t wait until a small problem becomes a full replacement. Call Ellsworth Contractors at (888) 445-6077 and we’ll schedule a free estimate. We’ll tell you what’s worth saving, what needs replacing, and what it’ll cost to do it right.

Written by Reed Calloway, Owner at Ellsworth Contractors, serving Paradise and Southern Nevada.