Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Paradise Homeowners Choose ViewLux Construction
ViewLux tile and stone systems live or die on what’s underneath them, and that’s exactly where most Paradise installs fail. We offer the Paradise ViewLux service homeowners need – not as a factory-authorized dealer, but as an independent provider that’s spent years tearing into failed ViewLux work to rebuild it properly. We spec, install, and repair ViewLux porcelain plank, marble-look slab, mosaic sheet, and large-format floor tile, with a focus on the substrate and waterproofing details that determine whether your tile lasts five years or fifty. Call (888) 445-6077 for a free estimate on any ViewLux repair or installation in Paradise.
Why Trust Ellsworth Contractors for Your ViewLux Construction?
Reed Calloway grew up in the Whitney neighborhood of Paradise, back when much of this valley was still scrubland. He came up through the construction technology program at the College of Southern Nevada, then spent years on job sites before founding Ellsworth Contractors. That background matters when you’re dealing with ViewLux products, because tile work doesn’t forgive shortcuts. We’ve pulled up enough ViewLux floors and shower pans to know precisely where the product’s installation requirements get ignored: the uncoupling membrane that never went down, the flood test that got skipped, the thin-set that got spot-bonded instead of fully troweled. When we work on ViewLux in Spring Valley and Paradise, we treat the substrate as the actual project. The tile is just the finish layer. Our crew uses ViewLux’s specified grout, trim, and transition profiles, paired with proven aftermarket membranes like Schluter where ViewLux’s own detail spec runs thin. You get tile work that stays bonded, flat, and crack-free through Paradise’s 110-degree summers and the thermal cycles that come with them.
Styles & brands we work with







Common ViewLux Construction Problems We Fix in Paradise
Here’s what we actually find when Paradise homeowners call us about failing ViewLux installations. These aren’t theoretical failure modes. They’re the conditions we’ve documented pulling apart real jobs.
- Cracking and hollow spots on ViewLux Glossy Porcelain Plank Tile (12×24 and 6×36 wood-look). This is the most common call we get. The tile was set over bare drywall or plywood without an uncoupling membrane. Paradise’s temperature swings cause the substrate to move, and the tile has no flexible layer to absorb that movement. Cracks show up at the grout joints within a season. We fix it by removing the affected run, installing a proper membrane, and resetting the tile with full thin-set coverage.
- Debonding ViewLux hex, penny, or linear mosaic shower pan tile. The sheet was set over a pre-fab pan without a flood test or a proper waterproofing bond coat. In a Paradise shower that sees daily use plus hard municipal water, the bond fails and the tiles start lifting. The pan flexes underfoot. We replace the pan, flood-test it for 24 hours, and relay the mosaic with epoxy grout rated for wet environments.
- Grout shrinkage and efflorescence on ViewLux matte porcelain backsplash. We see this on Paradise kitchen backsplashes where someone used sanded grout on unsealed porous tile edges. The grout pulls away from the tile and white mineral deposits bloom along the lines. It looks like a tile defect. It’s actually an installation error – wrong grout, unsealed edges – and it’s correctable without tearing out the whole backsplash.
- Lippage and cracking on ViewLux Matte Porcelain Floor Tile (24×24 large-format). Large-format tile magnifies every substrate irregularity. When installers spot-bond instead of achieving full thin-set coverage, you get lippage at the margins and eventual cracks under foot traffic. Paradise homes with slab-on-grade foundations make this worse because the slab itself may not be flat. We check the slab with a straightedge before we ever open a bag of thin-set.
- Transition failures where ViewLux tile meets carpet, vinyl, or wood flooring. The tile edge gets chipped or the transition strip loosens because the wrong profile was used or the height differential wasn’t managed. We stock ViewLux’s matching transition profiles so the repair doesn’t look like a patch job.
ViewLux Parts & Our Repair-vs-Replace Approach
If you have a ViewLux tile installation that’s failing, the first question isn’t whether we can fix it. It’s whether the tile failed or the substrate failed. They’re different problems with different costs. A sealed and re-grouted backsplash is sometimes salvageable. A debonded shower pan almost never is, because the waterproofing layer underneath has already been compromised and you’ll be chasing leaks forever. When we do repair, we use ViewLux’s specified accessory lines – matching grout, trim, and transition profiles – so the repair blends with the original install. Where ViewLux’s own detail spec is thin, we pair their tile with proven aftermarket membranes like Schluter. We stock common ViewLux grout colors and trim profiles locally for fast turnaround on Paradise jobs. For full replacements, we order directly from current ViewLux production lines. If you need an exact match on a discontinued color, call (888) 445-6077 and we’ll tell you honestly whether it’s feasible or whether a complementary current color makes more sense.
Our ViewLux Service Process – Step by Step
When you call us about ViewLux work in Paradise, here’s how it goes.
- 1
Diagnosis. We inspect the installation, not just the visible tile. We check for substrate movement, moisture intrusion, thin-set coverage, and grout condition. On failing floors, we’ll pull a tile or two to see what’s underneath. That tells us whether we’re repairing tile or rebuilding a substrate.
- 2
Repair or install. For repairs, we remove the failed area, prep the substrate properly – including an uncoupling membrane if the original install skipped it – and reset with full-coverage thin-set. For new installs, we follow ViewLux’s spec from the membrane up: flat substrate, proper trowel notch, full coverage, specified grout.
- 3
Test. On any shower work, we flood-test the pan for 24 hours before tile goes down. On floors, we check for flatness and let the thin-set cure before grouting. In Paradise’s dry heat, we manage cure times carefully – thin-set that dries too fast loses bond strength.
- 4
Warranty. We stand behind our workmanship with a written warranty. We don’t pretend to speak for ViewLux – we’re an independent contractor – but we build to manufacturer spec, which keeps your ViewLux product coverage intact.
See the difference
Before
After
Before
After
Before
AfterViewLux Products We Service & Install in Paradise
We work across the ViewLux tile portfolio that Paradise homes actually have. That includes ViewLux Glossy Porcelain Plank Tile in both 12×24 and 6×36 wood-look formats, the ViewLux Marble-Look Porcelain Slab used for shower walls and fireplace surrounds, ViewLux Mosaic Sheet Tile in hex, penny, and linear patterns for backsplashes and shower pans, and ViewLux Matte Porcelain Floor Tile in 24×24 large-format. Each line has its own installation requirements, and we’ve installed enough of all four to know them cold. We stock common ViewLux grout colors, trim profiles, and transition strips locally in Paradise so repairs don’t wait on a warehouse shipment.
We Also Service These Brands
ViewLux is a strong tile line, but no single brand fits every project. Ellsworth Contractors also works with KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler plumbing fixtures. We bring the same substrate-first standard to every brand we install – the right product for the job, never a substitution because it’s convenient for us.
FAQs – ViewLux Construction Service in Paradise
Sometimes, but not always. ViewLux rotates production lines, and older colors periodically disappear from the catalog. We can match many discontinued ViewLux tiles using current production runs with similar dyes and formats, or source remaining stock through our distribution network. We’ll tell you plainly if an exact match isn’t possible, and we’ll show you a complementary current color that won’t look like a patch. Call (888) 445-6077 with your tile’s color code or a photo, and we’ll see what’s actually available.
Cracking at the grout joints on ViewLux 24×24 or plank tile almost always means the substrate is moving and the original installer skipped the uncoupling membrane. Paradise’s temperature swings put real stress on slab-on-grade floors – the slab expands and contracts, and the tile has nowhere to go. If you’re seeing cracks within a season or two of installation, that’s a substrate failure, not a tile defect. We fix it by pulling the affected area, installing a proper membrane, and resetting the tile with full coverage. Call (888) 445-6077 for an inspection.
Yes, ViewLux tile works in Paradise’s hard water, but the grout and sealing choices matter more than the tile itself. Our local water is mineral-heavy, and unsealed grout will accumulate calcium deposits that look like haze and are miserable to remove. We use epoxy or sealed grout on ViewLux shower installations, and we recommend sealing the tile edges on matte or textured finishes. The real risk in a Paradise shower isn’t the water – it’s the waterproofing underneath. We flood-test every pan before tile goes down. Call (888) 445-6077 to talk through your shower project.
Yes, but we prep the surface first. ViewLux mosaic and slab tile needs a sound, clean substrate. We score and clean the painted drywall, apply a bonding primer if needed, and then set the tile with a polymer-modified thin-set. Skipping prep is why some Paradise backsplashes start popping tiles within a year. We don’t skip it. Call (888) 445-6077 for a backsplash estimate – most installations in Paradise run $800 to $2,500 depending on the tile line and square footage.
A ViewLux backsplash typically goes in within one to two days. A walk-in shower with ViewLux tile runs three to six days, including the 24-hour flood test. A full ViewLux floor installation depends on square footage and substrate condition – plan on two to five days for most Paradise homes, with cure time factored in. Repair jobs move faster once we diagnose the substrate issue. Call (888) 445-6077 and we’ll give you a schedule that’s grounded in your specific project, not a brochure.
Book Your ViewLux Service in Paradise, NV
If your ViewLux tile is cracking, debonding, or just never looked right, we’ll diagnose it straight. Reed and the Ellsworth Contractors crew have been fixing failed tile work across Paradise long enough to know that the fix that matters is the one underneath. Build it right the first time or you’ll be back explaining why you didn’t. Call (888) 445-6077 today to schedule your free estimate.
Here’s what Paradise ViewLux work typically costs:
| Service | Price Range |
|---|---|
| Backsplash Installation | $800 – $2,500 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
Written by Reed Calloway, Owner at Ellsworth Contractors, serving Paradise since 1994.