Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Boulder City, NV | Ellsworth Contractors
We provide independent Ameristar service across Boulder City, 89005 and 89006, with a crew that understands both the equipment and the historic-district rules that govern nearly every home here. Ameristar value-tier HVAC and cabinetry shows up all over Boulder City’s 1930s-40s housing stock, and the one thing that makes our Ameristar work different is that we spec repairs around the brand’s known weak points instead of swapping like for like. Call (888) 445-6077 for a free estimate on any Ameristar repair or replacement in Boulder City, or if you need Ameristar repair in Henderson.
Why Boulder City Residents Choose Us for Ameristar Service
We’ve spent years installing and repairing Ameristar’s entry-level to mid-grade product lines across the Mojave, so we know exactly where the value engineering shows up on a roof, a cabinet run, or a shower surround. Reed Calloway, our owner, grew up in the Whitney neighborhood of Paradise and has spent nearly three decades watching this area grow from scrubland into one of the busiest construction corridors in Nevada, which is why we also offer Ameristar repair in Whitney. That background matters when you’re working on a 1940s Boulder City bungalow with plaster walls, a clay-tile roof, and an Ameristar unit that’s been baking in desert heat for fifteen years. We are an independent contractor; we are not authorized, sponsored, or endorsed by Ameristar, and we tell homeowners that up front. What we are is local to Boulder City, familiar with its historic-district constraints, and honest about which Ameristar parts hold up and which ones don’t.
Styles & brands we work with
Common Ameristar Construction Problems We Solve in Boulder City
Here’s what we see repeatedly on Ameristar equipment and finishes in Boulder City, and how the local conditions make each one worse:
- Chalked and folded condenser coils on Ameristar AC units: Boulder City’s intense UV and blowing desert dust pit the thin coil fins on Ameristar value-tier condensers fast. Then a homeowner does a routine rinse-down and the fins fold over, killing airflow on a 105°F afternoon. We replace with heavier-gauge aftermarket coils when the OEM piece is the known weak link.
- Marginal capacitors that hide until the first hot week: Ameristar furnace and AC units in Boulder City run hard from dawn through early afternoon, then cycle off during peak heat. That duty cycle masks a weak capacitor until the first sustained hot spell, when the unit won’t start at all. We check capacitors on every Ameristar service call in 89005 and 89006.
- Delaminated cabinet and vanity finishes on west-facing walls: The plaster walls of Boulder City’s 1930s-40s homes swing far more in temperature than newer Las Vegas stucco builds. Ameristar cabinet boxes and vanity finishes blister and delaminate on west- and south-facing walls where that swing is worst.
- Seized panels and corroded screws: Tight Boulder City lots mean units sit close to irrigation lines and dusty side yards. Ameristar unit panels and screws corrode and seize in that dust-and-irrigation cycle, so filter and coil access becomes a break-it-to-fix-it job if nobody has serviced the unit in years.
- Failed heat exchangers and control boards after hard summer duty: The dawn-to-early-afternoon summer duty cycle in Boulder City stresses Ameristar furnace heat exchangers and control boards more than a typical Las Vegas cycle. These are the first things we find failed on older Ameristar gas furnaces in the area.
Ameristar Service in Boulder City: What Local Conditions Mean for Your Equipment
Boulder City’s Historic District design review covers anything visible from the street, and many lots are only 25-50 feet wide. That single fact changes how Ameristar work gets done here more than any other variable. When we upgrade Ameristar cabinets, vanities, or roof components on a 1930s-40s home, we have to match original stucco texture and clay-tile profiles by hand. We stage materials on the street because there is no side yard to work from. On a narrow historic lot off Nevada Way recently, our crew tore out a delaminated Ameristar vanity and cabinet run in a 1940s plaster-walled bungalow, reframed the wall where desert heat cycling had pulled the substrate loose, and set new cabinetry with a quartz top that could handle the west-wall temperature swing. We hand-matched the interior stucco patch and staged the old boxes on the street because the lot had no side access. That’s the kind of sequencing this district forces on every job, and it’s why an Ameristar service call in Boulder City is never just a parts swap. Learn more about our full Ameristar sales & service capabilities.
Ameristar Models & Products We Service in Boulder City
We work on Ameristar by Trane M4 (M-series) gas/electric packaged and split systems, Ameristar R-410A split air conditioners and heat pumps in 2-5 ton residential sizes, and Ameristar 80% single-stage gas furnaces. We also handle Ameristar value-tier cabinet and vanity lines sold through big-box and dealer channels. Our parts approach is simple: we pull OEM Ameristar parts for anything safety- or warranty-sensitive, including heat exchangers, control boards, and compressor contactors. For capacitors, fan motors, and coils where the OEM piece is the known weak link, we use quality aftermarket replacements that hold up better in Boulder City’s UV and dust. On Ameristar value-tier equipment past roughly 12-15 years old, if a repair runs more than a third of replacement cost, we recommend replacing rather than chasing a second failure next summer.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in Boulder City
Here’s what Ameristar-related work typically runs in Boulder City. These ranges reflect the historic-district constraints, tight lot access, and hand-matching requirements that add labor compared to a standard Las Vegas suburban job.
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Full Bathroom Remodeling | $9,000 – $28,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Roof Repair | $400 – $1,800 |
| Tile Roof Repair | $600 – $2,500 |
What drives the cost on Ameristar work in Boulder City—and on Enterprise Ameristar service calls—is access, substrate condition, and whether the Historic District requires hand-matching or materials staging. Your free estimate includes a full inspection, written line-item pricing, and no surprises. Call (888) 445-6077 to schedule yours.
Serving Boulder City, NV — Our Local Coverage Area
We’re based in the Boulder City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in Boulder City
Yes, interior cabinet and vanity work generally falls outside Historic District design review, which covers exterior changes visible from the street. You can put Ameristar cabinets inside a Boulder City historic home without a design-review hearing. Exterior changes, like roof components or anything visible from the street, do require review. Call (888) 445-6077 and we’ll walk you through what needs approval and what doesn’t.
Boulder City homes built in the 1930s and 40s have plaster walls that absorb and release heat differently than the stucco-and-drywall assemblies common in Las Vegas. West- and south-facing plaster walls in Boulder City swing through a much wider temperature range daily, and Ameristar value-tier cabinet and vanity finishes blister and delaminate under that stress. Our fix is to spec better substrates and finishes that handle the swing.
Usually it’s the unit. Ameristar value-tier condensers in Boulder City deal with intense UV, dust, and a dawn-to-early-afternoon duty cycle that hides marginal capacitors. When the first sustained hot week hits, a weak capacitor or folded coil fins will cause short-cycling. We diagnose the unit first, then check whether the house’s insulation and air sealing are making the problem worse. Call (888) 445-6077 for a diagnostic visit.
No, we would not recommend Ameristar for a Boulder City historic roof. Ameristar is a value-tier brand, and historic clay-tile roofs in Boulder City require hand-matched tile profiles and materials that hold up to the district’s design standards. We’d steer you toward roofing products better suited to the job and the climate. For roofing questions, see our Boulder City service area page.
Yes. When monsoon-season wind or a fallen limb damages a roof on an Ameristar-equipped Boulder City home, we respond quickly, tarp and stabilize, then work through the repair with the Historic District’s requirements in mind. Call (888) 445-6077 and we’ll get a crew out to assess the damage.
Service Areas Near Boulder City
We serve Boulder City and the surrounding communities. Our Ameristar work extends into Ameristar service in Sandy Valley and Ameristar service in Paradise, along with Winchester, Las Vegas, Spring Valley, Whitney, and North Las Vegas.
Book Your Ameristar Service in Boulder City Today
Ready to get your Ameristar equipment or finishes sorted in Boulder City? Call (888) 445-6077 to schedule your free estimate. We’ll come out, assess the work, and give you a written line-item quote. Build it right the first time or you’ll be back explaining why you didn’t.
Written by Reed Calloway, Owner at Ellsworth Contractors, serving Boulder City and the surrounding Mojave communities.