Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Backsplash Installation Cost in Paradise?
Backsplash installation in Paradise runs $800 to $2,500 for most kitchen projects, with the average homeowner landing near $1,400 for a standard 30 to 40 square foot run of ceramic or porcelain tile. A larger kitchen with slab material, a window cutout, or intricate mosaic work pushes toward the top of that range. If you’re working with a single wall and a basic subway tile, expect to sit comfortably at the low end.
Those numbers are for the installation labor plus tile and setting materials. They don’t include countertop replacement or cabinet work, which we handle as separate line items when a kitchen remodel goes wider than the splash itself. When you call us at (888) 445-6077, we’ll give you a written estimate for your exact wall area, material choice, and what’s behind the old tile.
Key Takeaways
- Most Paradise backsplash jobs land between $800 and $2,500, tile and labor included.
- Slab material (quartz, quartzite) and mosaic patterns cost more than standard porcelain tile.
- Waterproofing with a proper substrate matters most in kitchens near stovetops and sinks, where moisture sits.
- Removing old tile typically adds a separate demo charge and can reveal drywall damage underneath.
- Estimates are free. Call (888) 445-6077 to schedule yours.
Backsplash Installation Cost Breakdown (2026)
Here’s how the $800 to $2,500 range breaks down line by line for a typical Paradise kitchen. These figures reflect real project costs in the area as of 2026, not national averages pulled from a spreadsheet.
| Line Item | Typical Cost Range |
|---|---|
| Tile material (ceramic, porcelain, glass) | $150 – $700 |
| Natural stone or mosaic material | $400 – $1,200 |
| Slab material (quartz, quartzite, marble) | $900 – $1,800 |
| Labor (installation, cutting, grouting) | $500 – $1,200 |
| Waterproofing substrate and prep | $150 – $450 |
| Old backsplash removal and disposal | $150 – $500 |
| Electrical outlet relocation or GFCI cuts | $100 – $350 per outlet |
| Under-cabinet lighting integration | $200 – $600 |
| Edge finishing and trim pieces | $75 – $300 |
So what drives you up or down? Material is the biggest lever. A 36 square foot wall of plain 3×6 ceramic might cost $200 in tile. The same wall in glass mosaic or a Calacatta-look slab jumps past $1,000. Labor climbs with complexity too. A straight subway tile run goes fast. A herringbone pattern, a chevron inset, or a full-height slab that needs a wet saw and careful seam work adds hours and cutting waste. If your kitchen has three outlets, a window, and a range hood to work around, those are all cutout steps that take time.
Waterproofing deserves its own mention. In Paradise, kitchens see hot dry air most of the year, then a burst of monsoon humidity in late summer. That swing, plus steam off a stove, is hard on any surface behind it. Schluter waterproofing systems give the tile a proper substrate rather than backerboard slapped over drywall. We build every splash on that foundation because it’s the difference between tile that lasts a decade and tile that cracks or molds in three years.
What Affects Backsplash Installation Pricing in Paradise
- Tile type and size. Small-format mosaic costs more to install per square foot than large-format tile. Every grout line is labor. A 2×2 glass mosaic takes noticeably longer to set than a 12×24 porcelain field tile.
- Wall area and kitchen layout. A galley kitchen with a single cooking wall keeps costs down. A U-shaped or L-shaped kitchen with splash on three walls can double or triple the square footage and push you past $2,000.
- Pattern complexity. Straight-stack and running-bond patterns are the most economical. Herringbone, chevron, basketweave, and inlaid accent strips add cutting and layout time. Expect $200 to $600 more for a complex pattern on a standard wall.
- Old tile removal. Sometimes a splash tiles right over the existing surface. More often the old tile, adhesive, and drywall come out first. Paradise kitchens built in the 1990s and early 2000s commonly have drywall damage behind the old backsplash that has to be patched before new tile goes up.
- Electrical and plumbing cutouts. Every outlet, switch, and under-cabinet light needs a crisp GFCI plate cut and a waterproof seal. Relocating an outlet to fit a new layout is extra work. So is notching tile around a faucet supply or disposal switch.
- Edge and trim details. Schiene profiles, bullnose pieces, pencil tiles, and under-cabinet trim all add material and finish labor. A clean edge on an open end wall takes more care than a run that dies into a cabinet.
How to Save on Backsplash Installation
The biggest savings come from keeping the design simple and the material honest. Here’s what actually moves the number down without cutting corners on the install.
- Stick to large-format tile. A 12×24 porcelain in a straight-stack layout cuts both material cost and labor time. Fewer grout lines, fewer cuts, fewer hours.
- Reuse your existing outlets. If the electrical layout works with the new design, keep it. Every relocated GFCI is $100 to $350 you don’t need to spend.
- Choose porcelain over stone or slab. Porcelain that mimics marble or quartzite runs a fraction of the price of the real thing and holds up better in a kitchen.
- Limit the splash to the cooking wall. If your kitchen has three walls of backsplash and you’re budget-conscious, splash the range wall at full height and keep the sides minimal or painted.
- Skip the accent strip. A single accent band looks nice but adds cutting, layout, and material. A clean field tile with a strong grout color reads just as sharp.
- Get a free estimate early. Design decisions made before demolition save money. We’ll walk your kitchen, measure the wall area, and hand you a written estimate at no cost. Call (888) 445-6077 to schedule.
What Does the $800 to $2,500 Range Actually Cover?
That range is a working, honest number for a Paradise kitchen backsplash. Here’s what sits inside it.
At $800 you’re looking at a small kitchen, one wall, basic ceramic or porcelain tile, existing outlets kept in place, and tile set over a sound existing substrate. Maybe 25 square feet. This is a fast, clean job that takes a day.
At $1,400 (the mid-range average) you have a standard 30 to 40 square foot kitchen, porcelain or glass tile, removal of an old splash, a proper Schluter waterproofing layer, a couple of outlet cutouts, and a clean edge finish. This is most of what we install.
At $2,500 you’re in larger kitchen territory. Three walls, mosaic or slab material, a window cutout, relocated outlets, under-cabinet lighting, and a herringbone or accent pattern. This is a full kitchen splash done right with no shortcuts.
Above $2,500 is possible, but it usually means you’re now including countertop replacement or cabinet work in the same project. Those are separate line items we quote on their own.
Repair or Replace the Old Backsplash?
If you have a few cracked or popped tiles, spot repair is often the cheaper route. But if the tile is loose in multiple spots, grout is failing across the wall, or water has gotten behind the substrate, replacement is the smarter spend. A splash installed on a failing substrate will keep failing no matter how many tiles you swap out.
In Paradise, we regularly see backerboard installed without waterproofing in kitchens from the 1990s. Those walls often show mold or soft board behind the tile by the time a homeowner decides to update. When that’s the case, the honest fix is to remove the old splash, repair the drywall, and rebuild with a proper waterproof layer. That’s not upselling – it’s stopping a problem that will come back. Our Backsplash Installation in Paradise page goes deeper on the materials and process we use on these jobs.
How Long Does a Backsplash Installation Take in Paradise?
Most kitchen backsplash jobs take one to three days from demo to final grout. A simple one-wall porcelain job over a sound substrate is often done in a single day. A three-wall kitchen with tile removal, waterproofing, outlet relocations, and mosaic work runs two to three days. Slab installation can add a day because the material is templated and cut elsewhere before it goes up.
Scheduling depends on material lead time. Ceramic and porcelain tile is usually in stock and ready to install within a week. Special-order glass mosaic, natural stone, or slab material can take 2 to 3 weeks to arrive. We’ll give you a realistic timeline in the estimate so you know when your kitchen is back to normal.
Frequently Asked Questions About Backsplash Cost
How much does a kitchen backsplash cost in Paradise, NV?
Most kitchen backsplash projects in Paradise cost between $800 and $2,500, with a typical job averaging around $1,400. That includes tile material, setting materials, waterproofing, labor, and finishing. Larger kitchens or premium materials push toward the top of that range. Call (888) 445-6077 for an exact quote based on your wall area and material choice.
Is it cheaper to install a backsplash myself?
The material savings are real, but the risk usually outweighs the savings. A poor waterproofing job behind the tile leads to mold, cracked grout, and a splash that has to come down within a couple of years. Tile edges around outlets or a window that aren’t cut cleanly can’t be hidden once the thinset sets. For a small single-wall job in a kitchen that already has a sound substrate, some homeowners do OK. For anything with slab material, water exposure near a sink, or a complex pattern, professional install saves money long term. Our pricing starts at $800, which is often close to what a homeowner spends on material and tool rental anyway.
Does tile type change the installation price much?
Yes. Material and labor both move with the tile choice. A standard 12×24 porcelain tile runs $3 to $12 per square foot installed. Glass mosaic or natural stone runs $12 to $25 per square foot. Slab material (quartz, quartzite, marble) runs $30 to $55 per square foot installed because it’s templated, fabricated off-site, and installed by a specialist. For a typical wall, that’s the difference between $1,000 and $2,000 on the same kitchen. Call (888) 445-6077 and we’ll walk you through which option fits your budget and kitchen use.
Can a backsplash be installed over the existing tile?
Sometimes, yes. If the existing tile is firmly bonded, the surface is flat and level, and the added thickness won’t foul the outlets or cabinet reveals, tile-over-tile works. Most Paradise jobs we see don’t meet those conditions because the old tile is at an outlet height that doesn’t leave room for the new layer, or because the old substrate is failing. When tile-over-tile isn’t safe, the honest answer is to remove the old splash, evaluate the wall, and rebuild. Call (888) 445-6077 and we’ll tell you which route your kitchen needs during a free estimate.
Does a waterproof membrane add cost to a backsplash installation?
Yes, typically $150 to $450 for the waterproofing step. It’s worth every dollar in a kitchen. Steam from a range, splashes near a sink, and the weekly wipe-down with a wet sponge all push moisture behind the tile. Without a waterproof layer, that moisture hits drywall and builds up. A Schluter system gives the thinset and tile a stable base that resists water and won’t grow mold. It’s the detail most remodelers skip and most homeowners end up paying for later. Call (888) 445-6077 to talk through the right substrate for your kitchen.
Why Homeowners in Paradise Call Ellsworth Contractors
Ellsworth Contractors is a licensed general contractor, and a backsplash is often part of a larger kitchen or bathroom project that touches tile, countertops, cabinetry, and plumbing. When your splash goes in alongside new countertops or a cabinet refresh, having one contractor accountable for every piece means you’re not chasing down three trades to fix one misaligned edge.
We carry that same full-scope approach across the property. Kitchens run from cabinet installation and countertop work (Cambria, Silestone, and Caesarstone quartz we source directly) to full kitchen remodeling that brings the whole room together. Bathrooms cover walk-in showers, tub-to-shower conversions, vanities, and Schluter waterproofing on every tile install. Outside, we handle roofing in GAF, CertainTeed, and Owens Corning products, siding in James Hardie, impact windows, fencing in Master Halco and Ameristar, and hardscaping in Belgard, Unilock, and Techo-Bloc pavers. If your project grows to include an ADU or prefab structure, we work with brands like Abodu, Dvele, Mighty Buildings, Boxabl, and Plant Prefab. One contractor, every system.
For a kitchen backsplash, that means we bring the right tile, the right substrate, and the right fabrication partners to the project rather than substituting whatever a single supplier has in stock. Built to last, specified to fit.
Schedule Your Free Backsplash Estimate
Pricing for a Paradise backsplash depends on wall area, tile choice, condition of the existing wall, and whether outlets or lighting need to move. Those are all things we can walk you through in about 30 minutes. Call (888) 445-6077 to schedule a free estimate, and we’ll give you a written price covering material, labor, demo, waterproofing, and finishing. No surprises, no line items that show up mid-job. If your kitchen splash is part of a larger remodel, we’ll quote the whole scope together so the project stays coordinated from the first tile to the last grout line.
Pricing reflects the Paradise market as of 2026. Ellsworth Contractors offers free estimates – call (888) 445-6077.
What Our Customers Say
"Quality construction and a professional operation. Communication was strongest at the site meetings, and slower by email in between."
— Beatriz Delgado"Every inspection passed first time. The building department clearly knows him and that made the whole process easier."
— Emily Wong"Framing crew was meticulous and the walls are straight everywhere. Drywall goes on a lot better when the framing is right."
— Carmen Garcia