Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Construction in Boulder City, NV | Ellsworth Contractors
We install and service Cambria quartz countertops throughout Boulder City, and yes, we work on the 1930s bungalows that make this town different from everywhere else in Clark County. Most of our Cambria work here is interior-only because the Historic District controls what changes outside, so we focus on getting the slab, the seam, and the fit right against old plaster walls and tight galley footprints. If you need Cambria measured, fabricated, or repaired in Boulder City, call (888) 445-6077 and we’ll put eyes on it. We’re an independent Boulder City General Contractor, not a Cambria dealer, and that matters more than you’d think.
Why Boulder City Residents Choose Us for Cambria Service
We’ve templated and installed Cambria in Historic District kitchens where the wall is out of plumb by an inch and the lot is 30 feet wide. That’s not the kind of job you learn in a showroom. Reed Calloway grew up in the Whitney neighborhood of Paradise and has spent nearly three decades in southern Nevada construction, from College of Southern Nevada training through years of job-site framing and finishing. He knows what quartz does when the afternoon sun hits a west-facing kitchen window in July. Our crews have handled every Cambria sales & service scenario that matters here: tight staging on narrow streets, hand-fitting backsplashes to 85-year-old plaster, and choosing seam placement that disappears from the doorway sightline. We work for you, not for a manufacturer program, and our pricing reflects that.
Styles & brands we work with
Common Cambria Construction Problems We Solve in Boulder City
- UV darkening and resin yellowing on light slabs. Boulder City sits at 2,300 feet in the Mojave with intense UV, and many 1930s homes have shallow overhangs. West-facing windows in kitchens off Nevada Way can bake a light Cambria like Ella or Whitehall. We’ve seen the resin begin to shift color where no window film or treatment existed. The slab wasn’t defective; the sunlight load was just brutal. We re-polish where possible and will tell you straight if a replacement makes more sense.
- Chips and hairline cracks at sink cutouts and cooktop corners. Historic District galley kitchens were never built for modern slab sizes. When a previous contractor squeezed a thin remnant into a tight corner, the stress concentrates at the cutout. We see it regularly. Our fix starts with researching the original template and understanding why it failed before we cut anything new.
- Etching and dulling around sink edges. Boulder City’s hard water sits on the surface and leaves mineral scale that gets mistaken for quartz damage. It’s not a defect, but it looks bad and feels worse. We can re-polish the affected area and recommend a surface treatment that actually works under this water chemistry.
- Staining at unsealed seams. Older plaster walls move with the seasons in Boulder City. When a seam runs against a wall that shifts, the caulk line opens and grime gets in. We re-cut and re-seal seams with matched-color adhesive and proper movement accommodation so the joint doesn’t fail the same way next year.
- Seam failures from poor staging on narrow lots. A 25-foot lot means slabs get staged on the street. If a fabricator cuts too many pieces to get them through the door, you end up with extra seams in bad places. We plan template sections around the lot and the doorway before we ever put blade to slab.
Cambria Service in Boulder City: What Local Conditions Mean for Your Equipment
Boulder City is not Las Vegas, and it’s not Cambria repair in Henderson territory. The federal government built this town for Hoover Dam workers, and nearly every home sits inside a Historic District where design review covers anything visible from the street. So when you put Cambria in a Boulder City kitchen, the exterior doesn’t change. The windows stay where they are. The shallow overhangs stay shallow. That means the quartz you choose has to live with the light and heat that comes through those original window openings, and we spec slabs like Torquay and Brittanicca with that exposure in mind. On a 1940s bungalow off Nevada Way, our crew pulled a cracked tile countertop and its built-up substrate out of a narrow galley kitchen and set Cambria Torquay on new cabinets with the seam pushed behind the sink run so it disappears from the doorway sightline. We templated in two pieces to fit the tight lot staging, then hand-fit the backsplash against the original plaster wall, which was out of plumb by nearly an inch. That’s what Cambria construction looks like here. Not a catalog photo. A house that’s been standing since before the interstate.
For anyone comparing us to contractors who mainly work the sprawl, know this: Boulder City service area work is different because the homes are older, the lots are tighter, and the design review board is watching. We plan for that before the first template.
Cambria Models & Products We Service in Boulder City
We fabricate and install from full Cambria slabs, not remnants pressed into service, and we handle Enterprise Cambria service with the same standards. The model lines we work with most in Boulder City are Ella, Torquay, Brittanicca, and Whitehall. Each has a different personality under desert light: Ella’s soft veining can read warm or cool depending on the room, Torquay’s movement hides seams well in long galley runs, Brittanicca carries a stronger stone look that holds up in historic interiors, and Whitehall needs the right window treatment if it faces west. We use matched-color seam adhesive and quality aftermarket undermount sinks and edge profiles. We don’t chase brand-badged accessories. The slab is the product. The fabrication is the craft.
See the difference
Before
After
Before
After
Before
AfterCambria Service Pricing in Boulder City
Here’s what Cambria work costs in Boulder City. These are line-item ranges for the work we quote every week, not placeholder numbers from a national site.
| Service | Price Range |
|---|---|
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Cabinet Installation | $4,000 – $13,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
Your cost depends on slab size, seam count, edge profile, and whether we’re pulling old substrate or working over new cabinets. A free estimate includes measurement, templating, and a written line-item quote so you know what you’re paying before any blade touches stone. Call (888) 445-6077 and we’ll schedule it.
Serving Boulder City, NV — Our Local Coverage Area
We’re based in the Boulder City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Cambria Construction in Boulder City
Cambria is a manufactured quartz surface, not a natural stone, so it doesn’t have the same porosity issues as marble or limestone. But Boulder City’s UV at 2,300 feet is relentless, especially through unshaded west-facing windows. Light slabs like Whitehall and Ella can show resin yellowing over years of direct exposure. We recommend UV window film or shading for light colors in high-sun kitchens, and we’ll tell you if the slab you want is a bad match for the window you have. Call (888) 445-6077 and we’ll walk your kitchen with you before you buy.
Yes, because Cambria is an interior finish. The Historic District design review in Boulder City covers exterior changes visible from the street. Your countertops, cabinets, and backsplash are inside the house. You can rebuild the whole galley kitchen and the board won’t blink. But if your kitchen remodel touches a window opening or exterior wall penetration, that’s a different conversation. We coordinate with the city on which parts of the job require review.
We hand-fit backsplashes to plaster walls that are rarely straight. On a 1940s bungalow off Nevada Way, the original plaster was out of plumb by nearly an inch, and we cut the backsplash to follow the wall rather than forcing it flat and cracking the stone. Matching original tile profiles and floor patterns is part of the work in this town. We don’t hide behind “close enough” in a Historic District kitchen.
In Boulder City, countertop installation runs $2,000 to $6,500, with backsplash work adding $800 to $2,500. Small kitchen remodels that include Cambria, cabinets, and the supporting work typically land between $9,000 and $20,000. The final number depends on footage, seam count, and edge detail. Call (888) 445-6077 for an exact quote – estimates are free and we give you the number in writing.
If the damage is localized, we repair and re-polish in place. A chip at the sink cutout or a hairline at the cooktop corner can often be filled and finished without removing the slab. If the field is cracked or the discoloration runs through, we replace it, and we’ll show you which situation you have before you spend a dollar. We don’t sell repairs that won’t last, and we don’t sell replacements you don’t need.
Service Areas Near Boulder City
We also provide Cambria service in Cambria service in Paradise, Cambria service in Sandy Valley, Winchester, Spring Valley, and North Las Vegas. If you’re just outside Boulder City, call and ask. Chances are we’re already working nearby.
Book Your Cambria Service in Boulder City Today
If you need Cambria measured, fabricated, repaired, or replaced in Boulder City, call (888) 445-6077. We’ll schedule the template, give you a written quote, and get the job done without drama. Build it right the first time or you’ll be back explaining why you didn’t.
Written by Reed Calloway, Owner at Ellsworth Contractors, serving Boulder City and the Las Vegas Valley.