CGI Construction Service Nationwide

Why Paradise Homeowners Choose CGI Construction

CGI cabinetry service in Paradise means we fit, modify, repair, and install CGI cabinet systems in southern Nevada kitchens every month, and we know exactly how these boxes behave when summer heat cycles meet air conditioning and winter heating dries the indoor air to desert levels. We’re an independent contractor serving Paradise and surrounding Clark County, not authorized or sponsored by CGI, so our loyalty sits with getting your install right in your home rather than protecting a dealer program. Reed Calloway runs Ellsworth Contractors from deep local roots here, and we’ve spent years learning which CGI cabinet failures are repairable and which ones mean the box has to go. Call (888) 445-6077 for a free estimate on any CGI-related work in Paradise.

Why Trust Ellsworth Contractors for Your CGI Construction?

Our crews work with CGI Ready-to-Assemble (RTATM) cabinetry, pre-assembled all-wood boxes with plywood cases and hardwood face frames, Euro-style frameless and full-overlay lines, and CGI refacing doors and drawer fronts. That product depth matters because CGI has changed its SKU lineup over the years, and customers with older kitchens often can’t tell whether they need a single replacement door, a full reface, or an entirely new run. We can usually make that call in one visit. Reed came up through the construction technology program at the College of Southern Nevada before spending years on job sites framing, finishing, and solving cabinet problems under experienced crews, and he still approaches every CGI inspection the same way he learned to read a level line on his first framing crew: check the box square, check the reveals, check what’s happening behind the door. Independently servicing CGI cabinetry in Paradise means we’re not pushing replacement when a repair makes more sense.

Common CGI Construction Problems We Fix in Paradise

• Thermofoil and laminate peeling along door and drawer edges. CGI’s white shaker and laminate door lines use thermofoil finishes that expand and contract with humidity swings. In Paradise, summer AC pulls moisture out of the air while winter heating drives it lower still, and the adhesive bond along the milled edges eventually separates. We see this most often on dishwasher-bay doors and drawer fronts near the sink, where steam adds moisture to an already stressed edge. The fix is usually a matched replacement door or a full reface if the peeling is widespread, not an entire new kitchen.
• Swollen or crumbling sink base and dishwasher bay cabinets. Paradise homes from the 1960s-70s often have original cast iron or galvanized plumbing, and even newer PEX systems develop slow drips at the slip joints under the sink or at the dishwasher supply line. Particleboard and MDF CGI boxes wick that water and swell along the bottom edges, silently losing structure until the door no longer hangs square. We pull the affected base, check the plumbing, and install a new plywood-box CGI unit before the damage spreads to the adjacent run.
• Drawer glides and hinges loosening because the box was racked out of square. On frameless Euro-style CGI boxes, installers who don’t check level across the full base run can rack the cabinet before the fasteners even go in. Six months later, drawers drag, soft-close mechanisms bind, and hinge screws keep backing out. Our crews always shim and relevel the entire run end to end, not cabinet by cabinet, because a half-inch bow over nine feet shows up first at the drawer lines.
• Toe kicks, fillers, and crown miters opening up. Slab-on-grade Paradise houses don’t settle evenly. The clay-heavy soil beneath Clark County’s unincorporated islands and older subdivisions moves with moisture, and the cabinet run shifts with it. Painted CGI shaker doors at the ceiling line are the first to show it – miter joints open at the crown, fillers pull away from the wall, and toe kicks separate at the floor. We typically reset the affected sections and re-secure them to the wall with proper blocking rather than caulking over the movement.
• Hardware failing on high-use drawers after years of daily cycles. Undermount glides on CGI’s full-extension drawers carry a finite load rating, and Paradise kitchens with heavy cookware or stacked dish sets push them past their design life. When a CGI-specific glide SKU is discontinued, we source a dimensionally matched aftermarket glide that holds the same reveal line – never a substitute that changes how the drawer face sits against the cabinet front.

CGI Parts & Our Repair-vs-Replace Approach

Genuine CGI hardware – hinges, drawer glides, shelf clips, and connectors – is our first call when a part is still in production. We match factory CGI door styles and drawer front profiles directly from current SKU listings, and we keep a working inventory of common hinge overlays, undermount glide lengths, and soft-close mechanisms in our southern Nevada shop. When CGI has discontinued a specific part number on an older cabinet line, we use dimensionally matched quality aftermarket slides and hinges that maintain the exact reveal line and drilling pattern. The test is always whether the door sits where it sat before. If the boxes are sound, refacing plus new hardware costs far less than a full replacement and gives you another decade in a Paradise kitchen. If the boxes are swollen or sagging, replacement is the better spend, and we tell you that straight. Call (888) 445-6077 and we’ll inspect your CGI cabinets honestly.

Our CGI Service Process – Step by Step

1. Full-run diagnosis. We don’t look at one door or one drawer in isolation. Our crew checks the entire run for level end to end, measures reveal lines against CGI’s factory spacing, inspects sink and dishwasher bays for moisture, and notes any hinge or glide slop that points to a racked box or worn hardware.

2. Repair or replacement recommendation. You get a written line-item quote that separates cabinet work from countertop work, plumbing touches, and any electrical or drywall scope. Fixed pricing with no change orders means the number we give you is the number on the final invoice, barring anything hidden behind a wall we couldn’t see during diagnosis.

3. Installation or repair. On installs, we shim and level the entire base run before the first box is fastened. On refacing and door replacement, we match CGI door styles, hinge overlays, and drilling patterns so the new faces sit flush against the existing boxes and the adjacent run.

4. Testing and verification. Every drawer cycles open and shut with load, every soft-close mechanism engages without binding, every door aligns to its reveal line, and the toe kick and crown sit tight against the floor and ceiling. We check the run again a week later if the install was on a slab that showed any prior movement.

5. Workmanship warranty. Our installs carry a written workmanship warranty covering cabinet fit, hardware mounting, and finish integrity on anything we touched. Materials carry their CGI factory warranty, and we’ll help you understand what that covers before you sign off.

CGI Products We Service & Install in Paradise

We service CGI Ready-to-Assemble (RTATM) cabinetry in white and shaker door styles, CGI pre-assembled all-wood cabinets with plywood boxes and hardwood face frames, CGI Euro-style frameless and full-overlay lines, and CGI refacing doors and drawer fronts for partial kitchen updates. Our shop stocks common CGI hinge overlays, undermount drawer glide lengths, soft-close mechanisms, shelf clips, and cabinet connectors for faster turnaround on Paradise jobs. We also install CGI cabinetry into small kitchens, galley layouts, laundry rooms, and partial remodels where a full replacement isn’t the right scope.

We Also Service These Brands

CGI isn’t the only cabinet line in southern Nevada, and we’re not tied to a single manufacturer. Ellsworth Contractors installs and services KraftMaid cabinetry, Cambria and Silestone countertops, Kohler plumbing fixtures, and a full range of other major brands across kitchen, bath, and exterior work. That multi-brand depth means material selection follows your project’s performance needs and budget, not a supplier agreement.

FAQs – CGI Construction Service in Paradise

Is Ellsworth Contractors authorized by CGI?

No. Ellsworth Contractors is an independent contractor serving Paradise and Clark County, and we are not authorized, sponsored, or endorsed by CGI. That independence means we make repair-or-replace recommendations based on what your cabinets actually need, not on what a dealer program requires us to sell.

Do you use genuine CGI/OEM parts?

Yes, when the part is still in production. We match factory CGI door styles, hinges, and drawer glide hardware from current SKU listings first. When CGI has discontinued a specific part number on an older line, we use dimensionally matched quality aftermarket hardware that preserves the exact reveal line and mounting pattern.

Can you get replacement doors and fronts for discontinued CGI cabinet styles?

Often, yes. CGI’s shaker and white thermofoil door profiles have been produced across multiple product generations, and many older styles still have current equivalents in the RTATM or pre-assembled lines. When an exact discontinued match isn’t available, we source a door that matches the profile and finish closely enough to read as a matched set, and we’ll show you a sample before we order the full run.

My CGI thermofoil doors are peeling at the edges – repair or replace?

If the peeling is limited to one or two doors near the dishwasher or sink, replacement doors solve it cleanly. If the peeling is widespread across the kitchen, a full reface with new CGI doors and drawer fronts is usually the better long-term spend than chasing individual doors for the next five years. The boxes underneath are typically still sound, which is why a reface often makes more sense than a full replacement. Call (888) 445-6077 for a free inspection and exact quote.

Why do my CGI cabinets creak and the drawers stick more in summer?

Paradise’s summer heat drives indoor humidity down when the AC runs constantly, and the wood and thermofoil contract slightly. If the cabinet boxes were installed out of square, that contraction makes the existing racking more visible – drawers drag, hinges bind, and joints open at the crown and toe kick. A proper relevel and re-shim of the run usually fixes the creaking and sticking without replacing any cabinetry.

Can CGI cabinets support a quartz or granite countertop?

Yes, provided the boxes are properly shimmed, leveled, and fastened, and the base run is sound. CGI’s pre-assembled all-wood lines with plywood boxes carry quartz and granite loads well when the cabinets sit level end to end and the countertop contractor installs proper support bracketing. We routinely install quartz and granite over CGI cabinetry in Paradise kitchens, including tight-radius island overhangs that need reinforcing before the slab goes down.

Do you install CGI cabinets in small or partial kitchen remodels?

Yes, and this is one of our most common scopes. We install CGI cabinetry in small kitchens, galley layouts, and partial remodels where the homeowner keeps the existing floor plan but replaces a run, a peninsula, or a wall of cabinets. If your boxes are sound and you only need new doors, drawers, and hardware, refacing is the better spend. Call (888) 445-6077 to discuss your specific layout.

How much does CGI construction cost in Paradise?

These are CGI in Paradise-market ranges based on typical cabinet run lengths, countertop square footage, and backsplash scope. Your exact number depends on your kitchen layout, cabinet line, and whether we’re installing, refacing, or replacing. Estimates are free – call (888) 445-6077 and we’ll give you a fixed line-item quote.

Book Your CGI Service in Paradise, NV

If your CGI cabinets are peeling, dragging, swollen at the sink base, or you’re planning a kitchen remodel in Paradise, call (888) 445-6077. We’ll inspect the run, tell you straight what needs replacing versus what can be repaired, and give you a written line-item quote. Reed Calloway built Ellsworth Contractors on a simple rule: build it right the first time or you’ll be back explaining why you didn’t.

Written by Reed Calloway, Owner at Ellsworth Contractors, serving Paradise, Spring Valley, and Clark County since he first picked up a framing hammer.