Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Whitney, NV | Ellsworth Contractors
CGI construction service in Whitney, NV means something specific here: independent, non-authorized installation and repair of CGI full-overlay cabinetry, quartz countertops, and frameless shower enclosures across the unincorporated 89122 corridor. What makes our CGI work different in Whitney is that every kitchen or bath remodel we do runs through Clark County permitting, not a city building department, and our schedule is built around that reality. If you’re planning a CGI remodel and need straight answers on pricing and process, call us at (888) 445-6077.
Why Whitney Residents Choose Us for CGI Service
We’re not a CGI dealer counter or a manufacturer rep. We’re a licensed general contractor that has spent years specifying and installing CGI product lines across Whitney, and that independence means we tell you when an OEM part is worth the money and when a quality aftermarket alternative will outlast it. Reed Calloway, our owner, grew up in the Whitney neighborhood of Paradise and has watched this ZIP code shift from scrubland to one of the busiest construction corridors in Nevada. He learned the trade at the College of Southern Nevada’s construction technology program, then spent years on actual job sites before founding Ellsworth Contractors. That local grounding matters when you’re pulling a permit through Clark County at 8 a.m. and need the contractor to actually show up knowing which inspector handles the 89122 map grid.
We carry OEM-compatible CGI replacement hinges, drawer glides, and door hardware for warranty-sensitive work, and we keep the common aftermarket glass and seal kits on hand for shower enclosures that see hard, mineral-heavy Whitney water. When a cabinet door is warping on a west-facing wall off Whitney Ranch Drive, we don’t need a home visit to know what you’re describing. We’ve seen that exact failure a hundred times.
Styles & brands we work with
Common CGI Construction Problems We Solve in Whitney
- Warped and delaminating cabinet doors from desert UV. South- and west-facing kitchen runs in Whitney’s older 89122 homes sit under relentless sun for six-plus months a year. CGI Euro-style full-overlay doors hold up better than most, but doors and end panels on sun-exposed walls will eventually warp or delaminate at the laminate edge. We replace the affected doors, adjust the hinge geometry, and when needed, rebuild the cabinet end panel so the warping doesn’t come back in two summers.
- Quartz countertop edge chipping and seam failure over settled floors. Much of Whitney’s housing stock is mid-century to late-20th-century on slab-on-grade foundations that have settled unevenly. When cabinets sit on an unlevel base and a CGI quartz slab is set on top, you get edge chipping at the overhang and adhesive failure at the seams. We level the cabinet run before any slab goes down, and we reinforce seams on remodels where the original install never accounted for slab movement.
- Frameless glass shower enclosure leaks and hard-water etching. Whitney’s valley water is mineral-heavy. CGI frameless enclosures look clean for about two years, then the seal lines start failing and the glass clouds with etching. We replace worn seals, rebuild the weep channels where the original install skipped them, and spec aftermarket glass treatments that handle the valley’s calcium load better than stock components.
- Soft-close glide and hinge failure in high-use kitchens. CGI soft-close drawers are built for years of daily use, but Whitney kitchens get worked hard, and when the original install didn’t account for slab-on-grade movement, the drawers bind and the glides wear out fast. We replace the glide assemblies, shim the drawer boxes, and get the soft-close back to factory feel without replacing the whole cabinet box.
- Shower enclosure glass panel settling after tub-to-shower conversions. Converting an older fiberglass tub to a walk-in CGI shower in a 89122 home means working around walls and floors that have shifted over decades. If the shower base isn’t set dead level, the glass panel leans and the seals fail early. We set the base, correct for floor slope, and hang the glass plumb, then verify the swing clearance before the county inspector walks it.
CGI Service in Whitney: What Local Conditions Mean for Your Equipment
Because Whitney is unincorporated Clark County, every CGI kitchen or bath remodel in 89122 pulls permits through the county building department rather than a city, and county inspectors often require different rough-in clearances and venting than adjacent Henderson or Las Vegas would for the same job. We recently completed a CGI full kitchen remodel in the 89122 corridor near the Whitney Ranch area, where the homeowner’s original 1970s cabinets had warped doors and failing hinges from decades of west-facing sun exposure. We replaced the cabinet boxes with CGI full-overlay units, leveled the floor to correct settling, and installed a CGI quartz countertop with reinforced seams, then pulled the final through Clark County inspection without a single correction notice. That’s the practical difference: our CGI installation schedule is built around county inspection windows, not city ones, and that timing is a real advantage on tight-lot infill remodels where the window to get a wall opened and closed is measured in days. A contractor who only knows the Henderson or Las Vegas permit path will be learning on your job. We already know the sequence, the rough-in clearances the county wants, and which inspector covers your block.
CGI Models & Products We Service in Whitney
We install and repair three CGI product lines across Whitney: Euro-style full-overlay cabinets, quartz countertops, and frameless glass shower enclosures. For warranty-sensitive work, we source OEM CGI replacement doors, hinges, and glides, and we keep those on a local parts list so a Whitney homeowner isn’t waiting on a backordered hinge for three weeks. For frameless shower enclosures, we’re honest about where stock CGI components don’t hold up to the valley’s hard water, and we’ll spec quality aftermarket glass and seal kits where those are the better call. The same goes for cabinet boxes and countertop slabs: when warping or seam failure has already compromised the substrate, replacement usually wins over repair, and we’ll say that plainly before you spend money on a patch that won’t hold.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Whitney
Here’s what CGI work in Whitney typically costs, based on the scope we see across 89122:
| CGI Service | Typical Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Countertop Installation | $2,000 – $6,500 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Cabinet Installation | $4,000 – $13,000 |
What drives the price in Whitney specifically is the county permit path, the age and flatness of your floor, and whether we’re doing a clean replacement or correcting settling and sun damage from the original install. A free estimate from us includes a site check with a level on your cabinet base and an honest read on whether your existing CGI piece is worth repairing or replacing. Call (888) 445-6077 to schedule yours.
Serving Whitney, NV — Our Local Coverage Area
We’re based in the Whitney area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Whitney
Yes. Because Whitney is unincorporated Clark County, any remodel involving plumbing, electrical, or structural changes, including a tub-to-shower conversion or a kitchen cabinet and countertop replacement that moves plumbing or electrical, pulls a permit through the county, not a city. Call (888) 445-6077 and we’ll tell you exactly which permits your CGI project will trigger before you spend a dollar.
CGI Euro-style full-overlay cabinets hold up better than most laminate and thermofoil lines, but the extreme UV on south- and west-facing kitchen runs in Whitney will eventually warp doors and delaminate edges if the original install didn’t account for the exposure. That’s not a brand defect; it’s desert physics. We spec door styles and end panel treatments that reduce the failure point, and we replace sun-warped doors with ones built for the same angle of exposure.
Yes, and it’s one of our most common Whitney conversions. The catch is that older slab-on-grade bathrooms have almost always settled unevenly, so we level the shower base, correct for floor slope, and hang the glass plumb before sealing. Skip the leveling step and the enclosure will leak at the sweep within the first year. Call (888) 445-6077 for a free conversion estimate at your 89122 address.
A full CGI kitchen remodel in Whitney typically runs four to eight weeks from demo to final inspection, and the county permit path adds one to two weeks of scheduling compared with a city-permitted job in Henderson or Las Vegas. We sequence the work around those inspection windows so the job never sits idle waiting on a county sign-off. We’ll lay out the week-by-week timeline at your first estimate.
It depends on the substrate. If the seam has opened because the cabinet base settled, the right fix is usually to level the base, replace the slab with a new CGI quartz top, and reinforce the seams. If it’s a small chip at the overhang edge and the base is sound, we can do a color-matched repair. We’ll tell you which is right for your kitchen and what each costs before any work begins.
Service Areas Near Whitney
We provide CGI construction service throughout Whitney and the surrounding valley. That includes CGI service in North Las Vegas, CGI service in Enterprise, Paradise, Winchester, and Spring Valley. We also serve the full Whitney service area and points east toward the Henderson line.
Book Your CGI Service in Whitney Today
If you’re planning a CGI kitchen, countertop, or shower project in Whitney, build it right the first time or you’ll be back explaining why you didn’t. Call (888) 445-6077 to schedule a free estimate with our crew, and we’ll walk your site, check your cabinet base, and give you a written line-item price. We also provide full CGI sales & service across the valley.
Written by Reed Calloway, Owner at Ellsworth Contractors, serving Whitney, NV and the 89122 corridor.